SG 230 HV

SG 230HV - Bi-component methacrylate structural adhesive - Specific product for naval and wind industry bonding
SG 230HV - Bi-component methacrylate structural adhesive - Specific product for naval and wind industry bonding

Two-component methacrylate structural adhesive suitable for bonding fiber-reinforced composites in carbon and glass.

Specific product for naval and wind industry bonding.

SG 230HV ↓

  • methyl methacrylate → best balance between Tenacity and Torsion – mix ratio 10: 1 by volume
  • doesn’t provide abrasive contaminating actions → only light cleaning is required on composite supports
  • allows bonding with all thicknesses that occur → doesn’t exceed exothermically creating CO2 into the joint
  • very high thixotropy for vertical and filling applications
  • great functional gap-fill ≈ 1 mm ÷ 70 mm
  • Lloyd’s Register certificated (no. MATS / 4154/2) and ABS American Bureau of Shipping
  • versatile deposition / preparation periods (working-time) → fixing times (fix time) ≈ 35 ÷ 260 minutes selectable according to your site needs
  • Flexible → maximum elongation resistance ≈ 100 ÷ ​​150%
  • high tensile strength → 21 ÷ 24 MPa, normally the tearing of the glass and/or carbon fibers fails first
  • easy pre-dosed extrusion → through bi-cartridges 490 ML, 19 LT – 189 LT drums
  • can be mixed manually and not only through the dispensers → a dedicated guided procedure is available

 

Siemens wind, Ferretti Yachts Approved


Attachment

SG230HVTDS.0519
SG230LloydsRegister Final 2015
Type Approval Confirmation

Description

TYPICAL ADHESIVE CHARACTERISTICS @ 24°C (75°F)

Characteristics
Part A
(Adhesive)
Part B
(Activator)
Mix
(Part A + B)
Colour Off White Gray Gray
Mix ratio by volume 10 1 –
Mix ratio by weight 8.4 1 –
Density, g/cc 0.97 1.15 0.99

 

Tensile Strength MPa 21 – 24 Lap Shear Strength MPa 15 – 17
Maximum Tensile Elongation (%) 100 – 150 Service Temperatures °C -40 / +82
Tensile Modulus3 MPa 550 – 710 Resistenza al taglio MPa – FRP 12.8 – 15.2

 

System 

Cartridge

 System Drums

 Adhesive / Activator

 Working Time

(minutes)

 Fixture Time

(minutes)
SG230-30 SG230 HVA/SG605B 25 – 35 > 45
SG230-40 SG230 HVA/SG214B 35 – 45 > 60
SG230-60 SG230 HVA/SG216B 50 – 70 > 140
SG230-80 SG230 HVA/SG218 B 70 – 90 > 180
SG230-100 SG230 HVA/SG220 B 100 – 130 > 260

Additional information

Specific work-setting (component)

DYNAMIC bonding-line > 100 cm (IMPACTS + VIBRATIONS + TORSIONS), Operating Temperature <0 ° C, STATIC bonding-line <100 cm (LIGHT HANDLING)
Type of joint (application mode)

≈ 100% of SURFACE, BEAD – OVERLAP
Adhesive Working Time

10 ÷ 30 MINUTES, 30 ÷ 90 MINUTES
Adhesive Fixture Time

> 90 MINUTES, 30 ÷ 90 MINUTES
Substrates (suitable adherings match))

ARAMIDE FIBER-REINFORCED COMPOSITES # METALS and/or ALLOYS (Al – Ti – Ni – Cr – Fe), CARBON FIBER-REINFORCED COMPOSITES # CARBON FIBER-REINFORCED COMPOSITES, CARBON FIBER-REINFORCED COMPOSITES # GLASS REINFORCED FIBER COMPOSITES, CARBON FIBER-REINFORCED COMPOSITES # METALS and/or ALLOYS (Al – Ti – Ni – Cr – Fe), CARBON FIBER-REINFORCED COMPOSITES # METALS and/or ALLOYS (Cu / Zn – Fe – Pb), GLASS REINFORCED FIBER COMPOSITES # GLASS REINFORCED FIBER COMPOSITES, GLASS REINFORCED FIBER COMPOSITES # METALS and/or ALLOYS (Al – Ti – Ni – Cr – Fe)
Type of failure mode (after joint stress)

COHESIVE (bonding failure inside the adhesive: residue presence on substrates), SUBSTRATE ((adhering structure failure: adhesive causes a fracture on substrate)
component sector/process

NAUTICAL & NAVAL, WIND ENERGY

Related products

Whatsapp Contact Adhesive