MK 10-30

MK 10-30 is a two-component polyurethane adhesive characterized by a low viscosity, rigid and transparent highly resistant to impacts, impacts and UV rays.

MK 10-30 was developed for casting in sections from 1 to 5 mm when a high degree of transparency is required. Make sure that the mold is made of a material that can withstand the reaction temperature of the mixture.


Attachment

TDS MK 10-30

Description

PROPRIETA’ COMPONENTE A COMPONENTE B
NATURA CHIMICA Poliolo HDI
COLORE Trasparente Trasparente
DENSITA’ a 25 °C 1,05 g/ml 1,07 g/ml
VISCOSITA’ a 25 °C 435 mPa.s 30 mPa.s
RAPPORTO DI MISCELAZIONE IN VOLUME 1,03 1,00
RAPPORTO DI MISCELAZIONE IN PESO 1,00 1,00
CARATTERISTICHE TIPICHE DEL SISTEMA FINALE
TEMPERATURA DI APPLICAZIONE +10 / +30 °C
TEMPO DI GEL (50 g @ 20°C) 7 minuti
TEMPO DI RIMOZIONE (50 g @ 20°C) 50 minuti
TEMPO DI FINE REAZIONE (50 g @ 20°C) 20 ore
PICCO ESOTERMICO DELLA REAZIONE 80 °C
DENSITA’ 1,06 g/ml
DUREZZA 84 Shore D
ALLUNGAMENTO A ROTTURA 15 %
RESISTENZA ALLA TEMPERATURA – 30 / + 100 °C

Additional information

Specific work-setting (component)

Operating Temperature <0 ° C, STATIC bonding-line <100 cm (LIGHT HANDLING)

Type of joint (application mode)

≈ 100% of SURFACE

Adhesive Working Time

< 10 MINUTES

Adhesive Fixture Time

10 ÷ 30 MINUTES, 30 ÷ 90 MINUTES

Substrates (suitable adherings match))

CARBON FIBER-REINFORCED COMPOSITES # GLASS REINFORCED FIBER COMPOSITES, GLASS # GLASS, GLASS REINFORCED FIBER COMPOSITES # GLASS REINFORCED FIBER COMPOSITES, HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # CARBON FIBER-REINFORCED COMPOSITES, HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # GLASS REINFORCED FIBER COMPOSITES, HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS, METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe) # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), METALS and / or ALLOYS (Cu / Zn – Fe – Pb) # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), METALS and / or ALLOYS (Cu / Zn – Fe – Pb) # METALS and / or ALLOYS (Cu / Zn – Fe – Pb)

component sector/process

INDUSTRIAL COMPONENTS

Type of failure mode (after joint stress)

ADHESIVE (bonding failure between adhesive and adhering: no residue on substrates)

Whatsapp Contact Adhesive