MK HS 306

High-quality, low-modulus, one-component MS adhesive for spray applications.

Particularly suitable for bonding:

  • sealing of seams of welded sheets on horizontal surfaces
  • sealing of joints and overlapping parts
  • sealing of close joints
  • Free of isocyanates, solvents and silicones
  • Very quick, UV and aging resistant

Packaging: 600 ml bags – 300 ml cartridges – 20 – 200 Lt – 200 ml drums → pressure can

 

Description

PROPERTIES DATA
CHEMISTRY SILANE POLYMER
CONSISTENCY THIXOTROPIC
DENSITY » 1.450 ± 0.05 g/ml
HARDNESS SHORE-A » 30° (DIN 53505)
MODULUS @ 100 % » 0.85MPa (DIN 53504)
ELONGATION @ BREAK > 250 % (DIN 53504)
TENSILE STRENGTH » 1,25 MPa (DIN 50504)
SKIN TIME » 10 min. (23°C & 50 % R.H.)
CURING » 3 mm / day (23°C & 50 % R.H.)
TEMPERATURE RESISTANCE -40 / +90°C
TEMPERATURE APPLICATION +5 / +35°C
ACCESSIBILITY 6-12 h
ACIDS RESISTANCE MEDIUM
SOLVENTS RESISTANCE GOOD
UV RESISTANCE EXCELLENT
SALT WATER RESISTANCE EXCELLENT

Additional information

Specific work-setting (component)

DYNAMIC bonding-line > 100 cm (IMPACTS + VIBRATIONS + TORSIONS), Operating Temperature <0 ° C, STATIC bonding-line <100 cm (LIGHT HANDLING)

Type of joint (application mode)

≈ 100% of SURFACE, BEAD – OVERLAP

Substrates (suitable adherings match))

GLASS # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS, HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # METALS and / or ALLOYS (Cu / Zn – Fe – Pb), METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe) # HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS, METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe) # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), METALS and / or ALLOYS (Cu / Zn – Fe – Pb) # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), METALS and / or ALLOYS (Cu / Zn – Fe – Pb) # METALS and / or ALLOYS (Cu / Zn – Fe – Pb), SEMI-FINISHED BUILDINGS # METALS and / or ALLOYS (Cu / Zn – Fe – Pb), SEMI-FINISHED BUILDINGS # SEMI-FINISHED BUILDINGS, WOOD # GLASS REINFORCED FIBER COMPOSITES, WOOD # WOOD

Adhesive Working Time

10 ÷ 30 MINUTES

Adhesive Fixture Time

6 h ÷ 12 h

component sector/process

AUTOMOTIVE – TRUCK – BUS – AGRICULTURAL, FORESTRY MACHINES, FOOD, INDUSTRIAL COMPONENTS, NAUTICAL & NAVAL, TRAINS

Type of failure mode (after joint stress)

ADHESIVE (bonding failure between adhesive and adhering: no residue on substrates)

Whatsapp Contact Adhesive