MK EPOXY STICK is a hand-kneadable epoxy grout, reinforced with anti-rust steel, used to provide rapid and permanent repairs of ferrous metal articles.
| PROPRIETA’ | VALORI |
| NATURA CHIMICA | STUCCO EPOSSIDICO |
| TEMPO APERTO @ 20°C | 3 min. |
| COLORE | GRIGIO SCURO |
| DUREZZA | 80 Shore D |
| TEMPERATURA DI ESERCIZIO | 120°C in continuo, 150°C ad intermittenza. |
| RESISTENZA ELETTRICA | 30.000 MΩ |
| RIGIDITA’ DIELETTRICA | 300 V/mm |
| RESISTENZA ALLA COMPRESSIONE | 80 N/mm² |
| RESISTENZA AL TAGLIO SU ACCIAIO | 6.2 N/mm² |
| RESISTENZA AGLI AGENTI CHIMICI | Resistente agli idrocarburi, chetoni, alcoli, esteri, alo-carburi, soluzioni saline acquose, acidi diluiti e basi. |
| Specific work-setting (component) | STATIC bonding-line <100 cm (LIGHT HANDLING) |
|---|---|
| Type of joint (application mode) | CONNECTION – PLUG IN, SMALL POINT – DROP |
| Substrates (suitable adherings match)) | CARBON FIBER-REINFORCED COMPOSITES # METALS and/or ALLOYS (Al – Ti – Ni – Cr – Fe), CARBON FIBER-REINFORCED COMPOSITES # METALS and/or ALLOYS (Cu / Zn – Fe – Pb), GLASS REINFORCED FIBER COMPOSITES # GLASS REINFORCED FIBER COMPOSITES, GLASS REINFORCED FIBER COMPOSITES # METALS and / or ALLOYS (Cu / Zn – Fe – Pb), GLASS REINFORCED FIBER COMPOSITES # METALS and/or ALLOYS (Al – Ti – Ni – Cr – Fe), METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe) # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), METALS and / or ALLOYS (Cu / Zn – Fe – Pb) # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), METALS and / or ALLOYS (Cu / Zn – Fe – Pb) # METALS and / or ALLOYS (Cu / Zn – Fe – Pb) |
| Adhesive Working Time | < 10 MINUTES |
| Adhesive Fixture Time | 10 ÷ 30 MINUTES |
| Type of failure mode (after joint stress) | COHESIVE (bonding failure inside the adhesive: residue presence on substrates) |
| component sector/process | INDUSTRIAL COMPONENTS |
