Description
| Technology | Cyanoacrylate |
| Chemical nature | Ethyl |
| Appearance | Clear liquid tend to straw |
| Specific Gravity (25°C) | 1,06 ± 0.05 g/cm3 |
| Viscosity (25°C)
(Cone & Plate) |
1200 – 1800 mPa.s |
| Typical substrate | Wood, leather, plastics, metals |
MK CA 01
| MK CA 01 is designed for the assembly of difficult to bond materials which require uniform stress distribution and high resistance to loads and to the tensile stress/shear. The product provides rapid bonding of a wide range of substrates, including metals, plastics and elastomers. Particularly suitable for bonding of porous or absorbent materials as paper, cardboard, wood, leather and fabric. |
Attachment
TDS MK CA 01Additional information
| Specific work-setting (component) | Operating Temperature <0 ° C, STATIC bonding-line <100 cm (LIGHT HANDLING) |
|---|---|
| Type of joint (application mode) | HEAD to HEAD, SMALL POINT – DROP |
| Substrates (suitable adherings match)) | ELASTOMERS – GASKETS # ELASTOMERS – GASKETS, ELASTOMERS – GASKETS # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), FABRICS # ARAMIDE FIBER-REINFORCED COMPOSITES, FABRICS # CARBON FIBER-REINFORCED COMPOSITES, FABRICS # FABRICS, FABRICS # GLASS REINFORCED FIBER COMPOSITES, FABRICS # HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS, FABRICS # METALS and / or ALLOYS (Cu / Zn – Fe – Pb), HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS, LOW ENERGY SURFACE THERMO-PLASTIC POLYMERS # LOW ENERGY SURFACE THERMO-PLASTIC POLYMERS, LOW ENERGY SURFACE THERMO-PLASTIC POLYMERS # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), WOOD # WOOD |
| Adhesive Working Time | < 1 MINUTE |
| Adhesive Fixture Time | < 1 MINUTE |
| component sector/process | AERONAUTICAL / AEROSPACE, AUTOMOTIVE – TRUCK – BUS – AGRICULTURAL, FORESTRY MACHINES, FOOD, INDUSTRIAL COMPONENTS, SPORT, TRAINS, WIND ENERGY |
| Type of failure mode (after joint stress) | COHESIVE (bonding failure inside the adhesive: residue presence on substrates), SUBSTRATE ((adhering structure failure: adhesive causes a fracture on substrate) |
