MASTIKPLEXX 3295

MASTIKPLEXX 3295 is a two-component liquid structural methacrylate adhesive, designed for bonding metals and composite materials with very high resistance.

 

  • Excellent adhesion on different substrates, without the use of specific primers and abrasive surface treatments
  • Also used for small glass – metal assemblies.
  • Used in the automotive sector for fixing small thermoplastics parts 
  • Very fast curing.
  • High T° Resistance
  • Excellent resistance to acids and bases and hydrocarbon solvents.

Attachment

MASTIKPLEXX_3295_ENG

Description

PROPERTIES PART A PART B
CHEMICAL NATURE Methyl Methacrylate Catalyst
COLOUR Green Pink
DENSITY @ 23 °C 1,02 ± 0,02 g/ml 1,02 ± 0,02 g/ml
VISCOSITY @ 23 °C 5.000 ± 500 mPa.s 5.000 ± 500 mPa.s
MIX RATIO BY VOLUME 1 1
TYPICAL CHARACTERISTICS OF THE MIXED PRODUCT
OPEN TIME @ 23°C 2 – 3 minutes
FIXTURE TIME @ 23°C 5 – 6 minutes
SETTING TIME (50 % final strength) 1 hour
FULL CURE TIME 6 hours
MIXED PRODUCT COLOUR Light Grey
DENSITY 1,02 ± 0,02 g/ml
MINIMUM GAP FILL 0,5 mm
MAXIMUM FUNCTIONAL GAP FILL 2 mm
TENSILE STRENGHT 15 – 25 N/mm2
LAP SHEAR STRENGHT 15 – 25 N/mm2
OPERATING TEMPERATURE – 30 / + 130 °C

Additional information

Specific work-setting (component)

Operating Temperature > 90 ° C, Operating Temperature <0 ° C, STATIC bonding-line <100 cm (LIGHT HANDLING)

Type of joint (application mode)

CONNECTION – PLUG IN, SMALL POINT – DROP

Adhesive Working Time

< 1 MINUTE

Adhesive Fixture Time

< 10 MINUTES

Substrates (suitable adherings match))

CARBON FIBER-REINFORCED COMPOSITES # CARBON FIBER-REINFORCED COMPOSITES, CARBON FIBER-REINFORCED COMPOSITES # GLASS REINFORCED FIBER COMPOSITES, GLASS # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), GLASS REINFORCED FIBER COMPOSITES # GLASS REINFORCED FIBER COMPOSITES, HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # CARBON FIBER-REINFORCED COMPOSITES, HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # GLASS REINFORCED FIBER COMPOSITES, HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS, HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS # METALS and / or ALLOYS (Cu / Zn – Fe – Pb), METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe) # HIGH ENERGY SURFACE THERMO-PLASTIC POLYMERS, METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe) # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe), METALS and / or ALLOYS (Cu / Zn – Fe – Pb) # METALS and / or ALLOYS (Al – Ti – Ni – Cr – Fe)

component sector/process

AERONAUTICAL / AEROSPACE, AUTOMOTIVE – TRUCK – BUS – AGRICULTURAL, FORESTRY MACHINES, INDUSTRIAL COMPONENTS, SPORT

Type of failure mode (after joint stress)

COHESIVE (bonding failure inside the adhesive: residue presence on substrates), SUBSTRATE ((adhering structure failure: adhesive causes a fracture on substrate)

Whatsapp Contact Adhesive